PU resin hose is famous for its properties
The rubber hose is sucked flat during use. This is a headache. Many users often feel confused and helpless when encountering this situation. Let me introduce the reasons for this phenomenon.
Reasons for rubber hose collapse
The pressure of the pipeline system is too high
When the pressure of the pipeline system is too high, the extrusion force on the rubber flexible joint will increase, and it is easy to be sucked flat and deformed.
Improper installation angle of the pipeline system
During installation, it should be adjusted according to the natural curvature of the pipeline. Angles that are too small or too large may cause the rubber flexible joint to be sucked flat.
Quality problems of rubber flexible joints
The thickness of the rubber sheet is insufficient, the strength is insufficient, etc., which may cause the rubber flexible joint to be sucked flat.
Bending causes collapse
Rubber hoses often bend during use. If the bending is improper, it will affect its normal use and even cause collapse. Therefore, during installation, make sure that the bending radius of the flexible joint is large enough. At the same time, make sure that there is no excessive bending.
Excessive eccentricity or too small bending radius
When the eccentricity is large or the bending radius is too small, the rubber flexible joint will be sucked flat. Because this will cause the pipe to generate tensile and compressive forces at the same time. The bearing capacity of the rubber flexible joint is limited and it is difficult to withstand this force. Therefore, the pipe is sucked and flattened.
#rubber hose# #collapse problem of rubber hose#
Related posts
