What should consider when using the PU duct hose
Oil leakage from the fuel tank connection hose of the car may cause safety hazards and need to be solved in time. The following are the causes and solutions for oil leakage from the fuel tank connection hose of the car:
1. The quality, material or process of the oil pipe is poor, and there are problems with the structural design.
Solution: Choose a good quality oil pipe and replace it.
2. Improper assembly, unclean surface of parts and components, damaged or displaced gaskets or installation not in accordance with operating procedures.
Solution
Go to the repair shop to reassemble, clean the parts, and replace the damaged parts.
3. Uneven tightening force of the fastening nut, thread slippage and broken buckle lead to work failure.
Solution
Check the fastening nut and tighten it again.
4. The sealing material is excessively worn after long-term use, aging, deterioration, deformation and failure.
Solution: Check the wear of the sealing material and replace it in time.
5. Too much lubricating oil is added, the oil level is too high or the wrong fuel is added.
Solution: Add an appropriate amount of lubricating oil according to regulations.
6. The fuel tank itself is cracked and damaged, causing oil leakage from the fuel tank connection hose of the car.
Solution
The fuel tank needs to be replaced. The owner cannot replace it by himself and needs to go to the repair shop for replacement.
7. The fuel tank connection hose is broken.
Solution: The owner can find a plastic pipe with a diameter similar to the oil pipe to connect it, and connect the connection with wire to prevent oil leakage.
8. The fuel tank connection hose of the car has a gap and crack.
Solution: You can prepare some tape and soap. First, wipe the leaking part of the hose. Then apply soap or gum on the gap. Then use tape to wrap the gap until the oil stops leaking.
Related posts
