The application of hydraulic hose in brake system and power steering system
Concrete pump truck is a kind of machine that widely serves in construction. Because it can greatly improve the efficiency. While the concrete placement hose is a very important part of the work. So what should we pay attention to when operating the hose?
There are 3 point to focus on when operating concrete placement hose
First, before the deliver work, contact with the operator in the end of the hose. The bending radius of the front end hose should be greater than 1 meter. Besides, operator can not stand at the exit of the pipe. Because the hose sprays the concrete out with a high pressure. Thus once the operator near the exit, the high pressure concrete may hurt him.
Second, the transport pipeline must be fixed and firmly padded. Besides, never bend the deliver hose to prevent burst. When the pipeline is blocked and pumped after treatment, the end of the soft joint will shake rapidly. Then the concrete may spray instantly. Thus the operator should not get close to the hose.
Third, if you operate the concrete placement hose in high floors, never stand at the edge. Because when the deliver work begins, it will shack the hose. Then there will be huge risk for operator to fall.
Above are three point that you should focus on to use the concrete rubber hose. And hope this can help you. While if you want to learn more about concrete hose, just consult Everflex. Then we will offer you the best solution.
Related posts
