PVC layflat hose introduction

You are here:

Home
blog
PVC layflat hose introduction

PVC water belt advantage introduction

Common water belts are mainly used for agricultural production irrigation and fire water belts. There are many kinds of water belts, and the most common one is PVC water hose. PVC water belt is woven into high-strength polyester yarn into strip, and the inner and outer layers are coated with synthetic fiber. PVC water belt has cold resistance, pressure resistance, corrosion resistance, light handling, folding, tensile resistance, fracture resistance and high pressure expansion. The advantage of small rate and long service life. PVC water belt is light and soft, bright color, corrosion-resistant aging, wear-resistant, UV-resistant, complete in size, suitable for farmland, grassland, garden, drought-resistant drainage, oilfield, mine and construction site drainage.

PVC water belt maintenance knowledge

PVC water belts need to be properly maintained in order to better utilize their product advantages. Here is a brief introduction to the maintenance of PVC hose.

1. Prevent icing; During the winter season, when water supply needs to be suspended on the fire, in order to prevent the water from freezing, the pump must run slowly to maintain a small amount of water.
2, the water belt cleaning; after the water belt is used, it should be cleaned, and the water belt for transporting the foam must be carefully washed to protect the rubber layer. In order to remove the grease on the water belt, it can be washed with warm water and soap; the frozen water belt should first be dissolved, then cleaned and dried, and the water belt that has not been dried should not be stored in a roll.

3, PVC water belt can not be placed in the outdoor sun and rain for a long time, can not be placed near the heat source, to prevent aging, to avoid corrosion and viscous material pollution. The storage location should be stored at a suitable temperature and in a well ventilated environment. The water belt should be rolled up in a single layer. The water belt placed vertically on the water belt rack or reel should be turned several times a year and exchanged and folded several times. The water belt should be avoided to rub against each other and exchange folds if necessary.