Methods to clean a flexible rubber hose
The hose connector is an important part for connecting the hose and the equipment. And when installing the hose fitting, there must be no mistakes. Otherwise, it will affect work efficiency and safety.
How to install the hose connector
1. Use a screwdriver to loosen the screws on the outside of the connector
2. Insert the faucet into the hose connector and tighten the screws so that the screws are against the faucet
3. Turn the back half of the hose connector to press the connector and the faucet outlet
4. Connect the hose and turn on the faucet.
What should be paid attention to when installing the hose connector
1. Before using acid detergent to clean the pipe, it is necessary to clean the residual welding slag, stains, varnish and other substances on it. To avoid chemical reactions and unnecessary damage to the pipe.
2. In order to ensure the normal use of the hose connector, it is necessary to protect it specially. Whether in transportation, disassembly, or pickling, do not damage the threads, pipes, and sealing surfaces. The best way is to use tape to seal.
3. At each thread of the hose connector, it is necessary to use acid-resistant plastic belts or rubber belts for protection. Or after washing directly with water, apply dry oil to the thread position first. After drying, put it in acid to remove rust.
4. In the process of cleaning the pipe, you need to pay special attention to the mark on the pipe. Protect the integrity of the mark as much as possible. And before using pickling, you must complete all welding tasks. At the same time, in daily life, you also need to pay attention to the necessary protection of the hose.
#hose fitting# #hose connector#
Related posts
