Hydraulic hoses are often used in industrial production and in everyday life. The hydraulic pipe works in a high temperature and high pressure environment, so the hydraulic hose assembly must be properly installed to ensure the safety of the system. In the event of improper operation during the installation process, the quality of the hose may be poor, and accidents such as leakage and combustion may cause loss of personal property during use. As a professional hydraulic pipe manufacturer, let me explain how to properly assemble the hydraulic hose assembly.
1. Correct selection of hydraulic pipe joints
The quality of the joint is very important for the hydraulic pipe assembly. Consider the following factors when choosing a hydraulic fitting. Corrosion resistance, vibration, temperature, fluid compatibility, pressure, and use of transition joints.
2. Do a good job of measuring and cutting the hose, pay attention to accurate measurement and precise cutting to avoid installation failure due to error.
3. Install the angular positioning
Install angular positioning at the joint, both ends are assembled with mounting angle
4. Safe crimping equipment operation
Be careful to wear a safety goggles; keep an appropriate distance from the device; do not wear loose clothing;
Ensure that the equipment is installed securely; operate in strict accordance with the equipment operating procedures.
5. Guarantee the cleanliness of the hydraulic system
To ensure the cleanliness of the hydraulic system during installation, the following cleaning methods can be used for cleaning.
Compress air, water and sponge blocks containing isopropyl alcohol or use a cleaning solution.
The above is the precautions for assembling the hydraulic hose assembly in summary. I hope that everyone can operate correctly to ensure the correct installation of the hydraulic assembly.