Steel Wire Spiral Hydraulic Hose EN856 4SH 4SP

Hydraulic hose EN 856 4SH is suitable for: Extremely high pressure and high impulse hydraulic applications. This hose is the most flexible EN856 4SH hose in the industry with superior impulse performance (tested to 1,000,000 impulse cycles at bend radius lower than EN 856 Standard). Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and…

Heavy Duty Concrete Pump hose

Heavy Duty Concrete Pumping Hose Recommended For: High-pressure concrete pumping. Markets: Construction, Cement Placement Tube: Abrasion resistant synthetic rubber Reinforcement: 2”-3” two braids high-tensile steel wires, 3 1/2”-5” four layers spiral high-tensile steel cords. Cover: Pin-pricked synthetic rubber, Specially compounded Ultra abrasion cover is resistant to abrasion, cutting, gouging and weather. Type of Coupling: Putzmeister,…

Paint Spray Hose

Inner tube: Internal Core in Polyamide Reinforcement: 1 or 2 high tensile aramidic braid with antistatic polymerice braid  Outer tube: blue pin pricked polyurethane high abrasion resistance Safety factor: 4:1  Application: high pressure airless spray systems,chemical resistance solvents and aggressive fluids Temperature range: -40℃ (-40°F) - 100℃(+212°F)max.temperature recommended for water base hydraulic fluids and air : +70℃ (+ 158°F) PAINT SPRAY HOSE           …

Pressure Washer Hose

Recommended For: Heavt-duty used on hot and cold water high pressure cleaning equipment where heavy duty service is required. Tube: Black,oil resistant, synthetic rubber. Reinforcement: One or two braid of high-tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber. Temperature Range: -40℉ to +250℉ (-40℃ to +121℃) PRESSURE WASHER HOSE               Item…

Pressure Testing Hose

When you need a quick coupling to monitor and control pressure, we have what you need! Micro pressure test Hose and test point fitting let you test systems at working pressures without tools and check for leaks in multiple spots. They are ideal for hydraulic oils and other mineral based fluids used in off-road mobile…

Hydraulic Pressure Brake Hose SAE J1401 

Applications Designed for pressure transmission for auto, truck and trailer hydraulic pressure brake systems. Truck and trailer manufacturers,aftermarket packagers and wholesalers use this hose.  It is certified to meet SAEJ1401 requirements. Temperature range  -40~+100°C   Construction External layer:CR/EPDM Reinforcement :PET Middle layer :NBR Reinforcement :PET Internal layer:EPDM BRAKE HOSE SAE J1401         Item CodeI.DO.DWall ThicknessWall DiffExpansion Max. ml/mMin.Brust Pressure mmmmmmmm6.9MPa10.3MPaMPa TPH-013.210.5±0.23.65≤0.25

Air Hose Compressed Air Hose

Application:Oil mist resistant Air hose for versatile general industries and construction sites                      NOT suitable for transfer of petroleum products Temperature: -20℃(-4°F)to +70℃(+158°F) Tube: Black,smooth,synthetic rubber oil mist resistant Reinforcement: High strength synthetic yarn Cover: Yellow(Red/Blue/Black),smooth,synthetic rubber, weathering and ozone resistant Material:Good quality materials make our…